On Saturday 30 December 2006 20:11, Rob Malpass wrote:
>Trouble is, the other 4 channels... <cut> ...aren't available at line level
Mic level inputs are balanced-mono. That is, electrically balanced signals,
but only left or right per channel. There are three termials. Hot, cold and
ground (tip, ring and sleeve on a 6mm jack plug).
Using a Mono jack will connect cold and ground terminals (there are XLR
pinouts on the web, but same idea). Then just connect a 10K variable resistor
between input, hot and ground thus (apologies if the diagram doesn't work).
In ----\/\/\/\/\/----- Gnd
^-------- Hot
Job done.
Tim B.
--
--------------------------------
Tim Brocklehurst Marine Design
Better Systems - Better Results
--------------------------------
