On Sat, 2007-04-07 at 23:10 +0100, Vic wrote:
> > The sarge box will access the net via the router so long as eth1 is
> > down. However, when I bring eth1 up the box loses www connectivity.
>
> This usually means that bringing eth1 up changes your default route. If it
> does - you won't have access to networks outside your own LAN...
>
> Run "route -n" before & after bringing that interface up, and tell us if
> your default route changes.
>
> Vic.
>
>
This is the output of route with both IF's up:
marvin:/home/testermike# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 10.0.0.2 0.0.0.0 UG 0 0 0 eth0
marvin:/home/testermike# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 * 255.255.255.0 U 0 0 0 eth0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth1
default 10.0.0.2 0.0.0.0 UG 0 0 0 eth0
marvin:/home/testermike#
